SST25WF040BT-40I/CS is a member of the Serial Flash 25 Series family and feature a four-wire, SPI-compatible interface that allows for a low pin-count package which occupies less board space and ultimately lowers total system costs. SPI serial flash memory is manufactured with proprietary, high-performance CMOS SuperFlash technology. The split-gate cell design and thick-oxide tunneling injector attain better reliability and manufacturability compared with alternate approaches.This Serial Flash significantly improve performance and reliability, while lowering power consumption. The device writes (Program or Erase) with a single power supply of 1.65-1.95V. The total energy consumed is a function of the applied voltage, current, and time of application. Since for any given voltage range, the SuperFlash technology uses less current to program and has a shorter erase time, the total energy consumed during any Erase or Program operation is less than alternative flash memory technologies.
Feature
- Single Voltage Read and Write Operations - 1.65-1.95V
- Serial Interface Architecture - SPI Compatible: Mode 0 and Mode 3
- High Speed Clock Frequency up to 40MHz
- Dual Input/Output Support - Fast-Read Dual-Output Instruction (3BH) - Fast-Read Dual I/O Instruction (BBH)
- Superior Reliability - Endurance: 100,000 Cycles - Greater than 20 years Data Retention
- Ultra-Low Power Consumption: - Active Read Current: 4 mA (typical) - Standby Current: 10 μA (typical) - Power-down Mode Standby Current: 4 μA (typical)
- Flexible Erase Capability - Uniform 4 KByte sectors - Uniform 64 KByte overlay blocks
- Page Program Mode up to 256 Bytes/Page
- Fast Erase and Page-Program: - Chip-Erase Time: 400 ms (typical) - Sector-Erase Time: 40 ms (typical) - Block-Erase Time: 80 ms (typical) - Page-Program Time: 0.8 ms/ 256 bytes (typical)
- End-of-Write Detection with Software polling the BUSY bit in Status Register
- Hold Pin (HOLD#) to Suspend a serial sequence without deselecting the device
- Write Protection Pin (WP#) - Enables/Disables the Lock-Down function of the status register
- Software Write Protection- Write protection through Block-Protection bits in status register
- Temperature Range: -40°C to +85°C
- Packages Available - 8-lead SOIC (150 mils) - 8-contact USON (2mm x 3mm)
- All devices are RoHS compliant
