The LE2464DXATBG is two-wire serial interface EEPROM (Electrically Erasable and Programmable ROM). This device realizes high speed and a high level reliability by high performance CMOS EEPROM technology. This device is compatible with I2C memory protocol, therefore it is best suited for application that requires re-writable nonvolatile parameter memory.
Feature
- Capacity : 64k bits (8k x 8 bits)
- Low power consumption
- Single supply voltage : 1.7 to 3.6 V
- High data transfer rate
- Operating temperature : -40 to +85 °C
- High reliability
- Interface : Two wire serial interface (I2C Bus)
- Operating clock frequency : 400 kHz (Fast), 1000 kHz (Fast-Plus)
- Low Power consumptionStandby : 2 μA (max)Active (Read, 400 kHz) : 0.5 mA (max)Active (Read, 1000 kHz) : 2.0 mA (max)
- Automatic page write mode : 32 Bytes
- Read mode : Sequential Read and random read
- Slave Address :Slave address in 7 bit format is 0x50 or 0x54 depending of polarity of pin B3 (TEST)
- Erase/Write cycles : 106 cycles (Page Write)
- Data Retention : 20 years
Applications
- Camera module for mobile phone
- Mobile Phones
