The MIC22400YTSE is a high-efficiency, 4A integrated switch synchronous buck (step-down) regulator. The MIC22400YTSE is optimized for highest efficiency, achieving over 90% efficiency while still switching at 1MHz over a broad load range. The ultra-high-speed control loop keeps the output voltage within regulation even under extreme transient load swings commonly found in FPGAs and low-voltage ASICs. The output voltage can be adjusted down to 0.7V to address all low-voltage power needs. The MIC22400YTSE gives a full range of sequencing and tracking options. The EN/DLY pin combined with the Power-On-Reset (POR) pin allows multiple outputs to be sequenced in any way on turn-on and turn-off. The Ramp Control™ (RC) pin allows the device to be connected to another MIC22400YTSE family of products to keep the output voltages within a certain ∆V on start-up.
The MIC22400YTSE is thermally-enhanced 20-pin ePad TSSOP with a junction operating range from -40°C to +125°C.
Feature
- Input voltage range: 2.6V to 5.5V
- Output voltage adjustable down to 0.7V
- Output current up to 4A
- Full sequencing and tracking ability
- Power-On-Reset (POR)
- Efficiency > 90% across a broad load range
- Programmable frequency 300kHz to 4MHz
- Easy Ramp Control™ (RC) compensation
- Ultra-fast transient response
- 100% maximum duty cycle
- Fully-integrated MOSFET switches
- Micropower shutdown
- Thermal-shutdown and current limit protection®
- 20-pin ePad TSSOP
- -40°C to +125°C junction temperature range
