The MIC5191YMM is an ultra high-speed linear regulator. It uses an external N-Channel FET as its power device.
The MIC5191's ultra high-speed abilities can handle the fast load demands of microprocessor cores, ASICs, and other high-speed devices. Signal bandwidths of greater than 500kHz can be achieved with a minimum amount of capacitance while at the same time keeping the output voltage clean, regardless of load demand. A powerful output driver delivers large MOSFETs into their linear regions, achieving ultra-low dropout voltage.
1.25VIN ±10% can be turned into 1V ±1% without the use of a large amount of capacitance.
MIC5191YMM (1.0V reference) is optimized for output voltages of 1.0V and higher.
The MIC5191YMM is offered in 10-lead 3mm x 3mm MLF® and 10-lead MSOP-10 packages and has an operating junction temperature range of -40°C to +125°C.
All support documentation can be found on Micrel's web site at www.micrel.com.
Feature
- Input voltage range:
- VIN = 1.0V to 5.5V
- ±1.0% initial output tolerance
- Dropout down to 25mV @ 10A
- Filters out switching frequency noise on input
- Very high large signal bandwidth >500kHz
- PSRR >40dB at 500kHz
- Adjustable output voltage down to 1.0V
- Stable with any output capacitor
- Excellent line and load regulation specifications
- Logic controlled shutdown
- Current limit protection
- 10-lead MLF® and MSOP-10 packages
- Available -40°C to +125°C junction temperature
