The MIC5219-2.5BMM is an efficient linear voltage regulator with high peak output current capability, very-low dropout voltage, and better than 1% output voltage accuracy. Dropout is typically 10mV at light loads and less than 500mV at full load.
The MIC5219-2.5BMM is designed to provide a peak output current for start-up conditions where higher in-rush current is demanded. It features a 500mA peak output rating. Continuous output current is limited only by package and layout.
The MIC5219-2.5BMM can be enabled or shut down by a CMOS- or TTL-compatible signal. When disabled, power consumption drops to nearly zero. Dropout ground current is minimized to help prolong battery life. Other key features include reversed battery protection, current limiting, over-temperature shutdown, and low noise performance with an ultra-low noise option.
The MIC5219-2.5BMM is available in adjustable or fixed output voltages in SOT-23-5, and MM8® 8-pin power MSOP packages. For higher power requirements, see the MIC5209 or MIC5237.
Feature
- 500mA output current capability
- SOT-23-5 package - 500mA peak
- MSOP-8 package - 500mA continuous
- Low 500mV maximum dropout voltage at full load
- Extremely tight load and line regulation
- Tiny SOT-23-5 and MM8® power MSOP-8 package
- Ultra-low noise output
- Low temperature coefficient
- Current and thermal limiting
- Reversed battery protection
- CMOS/TTL-compatible enable/shutdown control
- Near-zero shutdown current
