The ADP170/ADP171/ADP172ACBZ-1.0-R7 are low voltage input, low quiescentcurrent, low-dropout (LDO) linear regulators that operate from1.6 V to 3.6 V and provide up to 300 mA of output current.The low 50 mVdropout voltage at 300 mA load improves efficiency and allows operation over a wide input voltage range. The low 23 μA of quiescent current at no load makes the ADP172ACBZ-1.0-R7 ideal for battery-operated portable equipment.
The ADP172ACBZ-1.0-R7 is capable of 31 fixed-output voltage options, ranging from 0.8 V to 3.0 V. The ADP172ACBZ-1.0-R7 is optimized for stable operationwith small 1 μF ceramic output capacitors. Ideal for powering digital processors, the ADP172ACBZ-1.0-R7 exhibits good transient perform-ance and occupies minimal board space. Compared with commodity-type LDOs, the ADP172ACBZ-1.0-R7 provides 20 dB to 40 dBbetter power supply rejection ratio (PSRR) at 100 kHz, making the ADP172ACBZ-1.0-R7 an ideal power source for analog-to-digital converter (ADC) mixed-signal processor systems and allowing use of smaller size bypass capacitors. In addition, low output noiseperformance without the need for an additional bypass capacitorfurther reduces printed circuit board (PCB) component count.
Short-circuit protection and thermal overload protection circuits prevent damage in adverse conditions. The ADP172ACBZ-1.0-R7 is availablein a tiny 4-ball, 0.5 mm pitch WLCSP for the smallest footprintsolution to meet a variety of portable power applications.
Applications- Mobile phones
- Digital camera and audio devices
- Portable and battery-powered equipment
- DSP/FPGA/microprocessor supplies
- Post dc-to-dc regulation
Feature
- Maximum output current: 300 mA
- Input voltage range: 1.6 V to 3.6 V
- Low quiescent current IGND = 23 μA with 0 mA load IGND = 170 μA with 300 mA load
- Low shutdown current: <1 μA
- Low dropout voltage: 50 mV at 300 mA load
- Output voltage accuracy: ±1%
- Up to 31 fixed-output voltage options available from 0.8 V to 3.0 V
- Accuracy over line, load, and temperature: ±3%
- Stable with small 1 μF ceramic output capacitor
- PSRR performance of 70 dB at 10 kHz and 73 dB at 1 kHz
- Low noise: 30 μV rms at VOUT = 0.8 V
- Current limit and thermal overload protection
- Logic-controlled enable
- Tiny 4-ball, 0.5 mm pitch WLCSP package
Applications
- Mobile phones
- Digital camera and audio devices
- Portable and battery-powered equipment
- DSP/FPGA/microprocessor supplies
- Post dc-to-dc regulation
(Picture: Pinout)
