Description:
The MCP1726T-ADJE/MF is a 1A Low Dropout (LDO) linear regulator that provides high current and low output voltages in a very small package. The MCP1726 comes in fixed or adjustable output voltage versions, with an output voltage range of 0.8V to 5.0V. The 1A output current capability and low output voltage capability make the MCP1726T-ADJE/MF a good choice for new sub-1.8V output voltage LDO applications that have high current demands.
The MCP1726T-ADJE/MF is stable using ceramic output capacitors that inherently provide lower output noise and reduce the size and cost of the entire regulator solution. Only 1 µF of output capacitance is needed to stabilize the LDO.
Using CMOS construction, the quiescent current consumed by the MCP1726T-ADJE/MF is typically less than 140 µA over the entire input voltage range, making it attractive for portable computing applications that demand high output current. When the MCP1726T-ADJE/MF is shut down, the quiescent current is reduced to less than 0.1 µA.
The scaled-down output voltage is internally monitored and a Power Good (PWRGD) output is provided when the output is within 92% of regulation (typical). An external capacitor can be used on the CDELAY pin to adjust the delay from 1 ms to 300 ms.
The overtemperature and short-circuit current limiting provide additional protection for the LDO during system fault conditions.
Features:
• 1A Output Current Capability
• Input Operating Voltage Range: 2.3V to 6.0V
• Adjustable Output Voltage Range: 0.8V to 5.0V
• Standard Fixed Output Voltages:- 0.8V, 1.2V, 1.8V, 2.5V, 3.0V, 3.3V, 5.0V
• Low Dropout Voltage: 220 mV typical at 1A
• Typical Output Voltage Tolerance: ±0.5%
• Stable with 1.0 µF Ceramic Output Capacitor
• Fast Response to Load Transients
• Low Supply Current: 140 µA (typical)
• Low Shutdown Supply Current: 0.1 µA (typical)
• Adjustable Delay on Power Good Output
• Short-Circuit Current Limiting and Overtemperature Protection
• 3x3 DFN-8 and SOIC-8 Package Options
Applications:
• High-Speed Driver Chipset Power
• Networking Backplane Cards
• Notebook Computers
• Network Interface Cards
• Palmtop Computers
• 2.5V to 1.XV Regulators
Feature
- Up to 1A output load current
- Low dropout voltage 220 mV typical
- Output voltage from 0.8V to 5.0V, both fixed and adjustable
- Stable with 1.0µF ceramic output cap
- Power good output with adjustable delay
- Low supply current 140 µA typical
- High PSRR: 54 dB at 100 kHz
- Low shutdown current 0.001 µA typical
- DFN-8 3x3 and SO-8 Pb-free packages
(Picture:Pinout / Diagram)
