The MIC5524-1.2YMT-T5 is a low-power, μCap, low dropout regulator designed for optimal performance in a very-small footprint. It is capable of sourcing 500mA of output current and only draws 38μA of operating current to do so. The MIC5524-1.2YMT-T5 includes an auto-discharge feature on the output that is activated when the enable pin is low and it has an internal pull down resistor on the enable pin that will disable the output when the enable pin is left floating, this is ideal for applications where the control signal is floating during processor boot up.
This high-performance LDO offers fast transient response and good PSRR in a 1mm x 1mm Thin (0.4mm high) DFN package.
Ideal for battery-operated applications, the MIC5524-1.2YMT-T5 offers 2% accuracy, extremely low dropout voltage (260mV @ 500mA), and can regulate output voltages down to 1.0V. Equipped with a TTL logic-compatible enable pin, the MIC5524-1.2YMT-T5 can be put into a zero-off-mode current state, drawing no current when disabled.
The MIC5524-1.2YMT-T5 is a μCap design, operating with very small ceramic output capacitors for stability, reducing required board space and component cost for space-critical applications. The MIC5524-1.2YMT-T5 has an operating junction temperature range of -40°C to 125°C.
Feature
- Input voltage range: 2.5V to 5.5V
- Fixed output voltages down to 1.0V
- 500mA guaranteed output current
- High output initial accuracy (±1%)
- High PSRR: 80dB
- Low quiescent current: 38µA
- Stable with 2.2µF ceramic output capacitors
- Low dropout voltage: 260mV @ 500mA
- Autodischarge and internal enable pulldown
- Thermal-shutdown and current-limit protection
- 4-pin 1mm x 1mm Thin DFN package
