L6668 is a current-mode primary controller IC, designed to build single-ended converters.
The IC drives the system at fixed frequency at heavy load and an improved Standby function causes a smooth frequency reduction as the load is progressively reduced. At very light load the device enters a special operating mode (burst-mode with fixed, externally programmed peak current) that, in addition to the on-board high-voltage start-up and the very low quiescent current, helps keep low the consumption from the mains and be compliant with energy saving regulations. To allow meeting compliance with these standards in power-factor-corrected systems too, an interface with the PFC controller is provided that enables to turn off the pre-regulator when the load level falls below a threshold. The IC includes also a programmable soft-start, slope compensation for stable operation at duty cycles greater then 50%, a disable function, a leading edge blanking on current sense to improve noise immunity, latched disable for OVP or OTP shutdown and an effective two-level OCP able to protect the system even in case the secondary diode fails short.
Feature
- LATCHEDDISABLEFOROVP/OTPFUNCTION
- DISABLEFUNCTION(ON/OFFCONTROL)
- 2%PRECISIONREFERENCEVOLTAGEEXTERNALLYAVAILABLE
- PROGRAMMABLESOFT-START
- BLUEANGEL,ENERGYSTAR,EUCODEOFCONDUCTCOMPLIANT
- ±800mATOTEMPOLEGATEDRIVERWITHINTERNALCLAMPANDUVLOPULL-DOWN
- SO16PACKAGEECOPACK
- PULSE-BY-PULSE&HICCUP-MODEOCP
