The VIPER50-E parts manufactured by ST are available for purchase at 9icnet Electronics. Here you can find various types and values of electronic parts from the world's leading manufacturers. The VIPER50-E components of 9icnet Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
The production status marked on 9icnet.com is for reference only. If you didn't find what you were looking for, you can get more valuable information by emails, such as the VIPER50-E Inventory quantity, preferential price, datasheet, and manufacturer. We are always happy to hear from you, so feel free to contact us.
The VIPER50ASPTR-E is IC SWIT PWM SMPS CM POWERSO10, that includes VIPER? Series, they are designed to operate with a PWM Low-Standby High Performance Controller Type, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Mounting Style features such as SMD/SMT, Package Case is designed to work in PowerSO-10 Exposed Bottom Pad, as well as the Surface Mount Mounting Type, the device can also be used as 10-PowerSO Supplier Device Package. In addition, the Power Watts is 50W, the device is offered in 1 Output Number of Outputs, the device has a Isolated of Output Isolation, and Internal Switch s is Yes, and the Voltage Breakdown is 700V, and Topology is Flyback, and the Voltage Start Up is 11V, and Voltage Supply Vcc Vdd is 8 V ~ 15 V, and the Frequency Switching is Up to 200kHz, and Fault Protection is Current Limiting, Over Temperature, and the Control Features is Frequency Control, Soft Start, Sync, and Output Voltage is 700 V, and the Operating Supply Current is 14 mA, and Output Current is 1.5 A, and the Switching Frequency is 100 kHz, and Duty Cycle Max is 50 %, and the Input Supply Voltage Min is 12.6 V, and Input Supply Voltage Max is 13.4 V.
The VIPER50ASP-E is IC SWIT PWM SMPS CM POWERSO10, that includes 8 V ~ 15 V Voltage Supply Vcc Vdd, they are designed to operate with a 11V Voltage Start Up, Voltage Breakdown is shown on datasheet note for use in a 700V, that offers Type features such as Current Mode PWM Controller, Topology is designed to work in Flyback, as well as the 200 kHz Switching Frequency, the device can also be used as 10-PowerSO Supplier Device Package. In addition, the Series is VIPER?, the device is offered in 50W Power Watts, the device has a Tube Alternate Packaging of Packaging, and Package Case is PowerSO-10 Exposed Bottom Pad, and the Output Voltage is 700 V, and Output Isolation is Isolated, and the Output Current is 1.5 A, and Number of Outputs is 1 Output, and the Mounting Style is SMD/SMT, and Mounting Type is Surface Mount, and the Internal Switch s is Yes, and Frequency Switching is Up to 200kHz, and the Fault Protection is Current Limiting, Over Temperature, and Control Features is Frequency Control, Soft Start, Sync.
VIPER50BSP with circuit diagram manufactured by ST. The VIPER50BSP is available in SOP-10 Package, is part of the IC Chips.
