The SPV1040TTR device is a low power, low voltage, monolithic step-up converter with an input voltage range from 0.3 V to 5.5 V, capable of maximizing the energy generated by solar cells (or fuel cells), where low input voltage handling capability is extremely important. Thanks to the embedded MPPT algorithm, even under varying environmental conditions (such as irradiation, dirt, temperature) the SPV1040TTR offers maximum efficiency in terms of power harvested from the cells and transferred to the output. The device employs a voltage regulation loop, which fixes the charging battery voltage via a resistor divider.
It is possible to set the maximum output current according to charging requirements by a sense resistor .
The SPV1040TTR protects itself and other application devices by stopping the PWM switching if either the maximum current threshold (up to 1.8 Apk) is reached or the maximum temperature limit (up to 155 °C) is exceeded. An additional built-in feature of the SPV1040TTR is the input source reverse polarity protection, which prevents damage in case of reverse connection of the solar panel on the input.
Feature
- 0.3 V to 5.5 V operating input voltage
- 140 mΩ internal synchronous rectifier
- 120 mΩ internal power active switch
- 100 kHz fixed PWM frequency
- Duty cycle controlled by MPPT algorithm
- Output voltage regulation, overcurrent and overtemperature protection
- Input source reverse polarity protection
- Built-in soft-start
- Up to 95% efficiency
- TSSOP8 package 3x4.4 mm
