BQ24250CYFFR

• High-efficiency Switch-mode Charger with Separate Power Path
• Start up System from Deeply Discharged or Missing Battery
• USB Charging Compliant
  • Selectable Input Current Limit of 100 mA, 500 mA, 900 mA,\ 1.5 A, and 2 A
• In Host Mode (After I2C Communication Starts and Before Watchdog Timer Times Out)
  • Programmable Battery Charge Voltage, VBATREG
  • Programmable Charge Current (ICHG)
  • Programmable Input Current Limit (ILIM)
  • Programmable Input Voltage Based Dynamic PowerManagement threshold, (VIN_DPM)
  • Programmable Input Overvoltage Protection Threshold (VOVP)
  • Programmable Safety Timer
• Resistor Programmable Defaults for:
  • ICHG up to 2 A with Current Monitoring Output (ISET)
  • ILIM up to 2 A with Current Monitoring Output (ILIM)
  • VIN_DPM (VDPM)
• Watchdog Timer Disable Bit
• Integrated 4.9 V, 50 mA LDO
• Complete System Level Protection
  • Input UVLO, Input Over-voltage Protection (OVP),Battery OVP, Sleep Mode, VIN_DPM
  • Input Current Limit
  • Charge Current Limit
  • Thermal Regulation
  • Thermal Shutdown
  • Voltage Based NTC Monitoring Input
  • Safety Timer
• 20 V Maximum Input Voltage Rating
• 10.5 V Maximum Operating Input Voltage
• Low RDS(on) Integrated Power FETs for up to 2 A Charging Rate
• Open Drain Status Outputs
• Synchronous Fixed-frequency PWM Controller Operating at3MHz for Small Inductor Support
• Robust Battery Detection Algorithm
• Charge Time Optimizer for improved charge times at any given charge current
• 2.4 × 2.0 mm 30-ball WCSP Packages

The bq24250C is a highly integrated single-cell Li-Ion battery charger and system power-path management device targeted for space-limited, portable applications with high capacity batteries. The single cell charger has a single input that operates from either a USB port or AC wall adapter for a versatile solution.