The LM3658SD/NOPB is a single chip charger IC designed for handheld applications.It can safely charge and maintain a single cellLi-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic.With both power sources present, the AC power source has priority. Charge current is programmed through an external resistorwhen operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USBpower, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V.
The LM3658SD/NOPB requires few external components and integrates internal power FETs, reverse current protection and current sensing.The internal power FETs are thermally regulated to obtain the most efficient charging rate for a given ambient temperature.
The LM3658SD/NOPB operates in five modes: pre-qualification mode, constant-current mode, constant-voltage mode, top-off mode andmaintenance mode. Additionally, the charger IC operates as a linear regulator in “LDO mode”, when the AC wall adapter is connectedand no battery is present. Optimal battery management is obtained through thermal regulation, battery temperature measurementand multiple safety timers.The LM3658SD/NOPB provides two open-drain outputs for LED status indication or connection to GPIOs.
Feature
The LM3658 is a single chip charger IC designed for handheld applications.It can safely charge and maintain a single cellLi-Ion/Polymer battery operating from an AC wall adapter or USB power source. Input power source selection of USB/AC is automatic.With both power sources present, the AC power source has priority. Charge current is programmed through an external resistorwhen operating from an AC wall adapter allowing charge currents from 50 mA to 1000 mA. When the battery is charged using USBpower, charge currents of 100 mA or 500 mA are pin-selectable. The termination voltage is controlled to within ±0.35% of 4.2V.
The LM3658 requires few external components and integrates internal power FETs, reverse current protection and current sensing.The internal power FETs are thermally regulated to obtain the most efficient charging rate for a given ambient temperature.
The LM3658 operates in five modes: pre-qualification mode, constant-current mode, constant-voltage mode, top-off mode andmaintenance mode. Additionally, the charger IC operates as a linear regulator in “LDO mode”, when the AC wall adapter is connectedand no battery is present. Optimal battery management is obtained through thermal regulation, battery temperature measurementand multiple safety timers.The LM3658 provides two open-drain outputs for LED status indication or connection to GPIOs.
