BQ7791506PW

• Ultra-low quiescent current: 8 μA typ. (NORMAL mode), 2μA (HIBERNATE mode)
• Full suite of voltage, current, and temperatureprotections
• Smart passive cell balancing removescell-to-cell imbalance
• Scalable cell count from 3 series to 20 series ormore
• Voltage protection (accuracy ±10 mV for OV, ±18mV for UV)
  • Overvoltage: 3 V to 4.575 V
  • Undervoltage: 1.2V to 3 V
• Open cell and open-wire detection(OW)
• Current protection
  • Overcurrent discharge 1: –10 mV to –85 mV
  • Overcurrent discharge 2: –20 mV to –170 mV
  • Short-circuitdischarge: –40 mV to –340 mV
• Temperatureprotection
  • Overtemperature charge: 45°C or50°C
  • Overtemperature discharge: 65°C or 70°C
• Additionalfeatures:
  • Independent charge (CHG) and discharge (DSG) FETdrivers
  • Smart cell balancing algorithm with integrated FETs (up to 50-mAbalancing current), also supports external FETs for higher cell-balancingcurrent
  • Ultra-low power HIBERNATE mode
  • High 36-V absolutemaximum rating per cell input
  • Resistor programmable overcurrent (OCD1/2)delay
• SHUTDOWN mode: 0.5-μA maximum

All trademarks are the property of their respective owners.

The BQ77915 device is a low-power battery pack protector that implements a suite ofvoltage, current, and temperature protections and a smart cell balancing algorithm withoutmicrocontroller (MCU) control. The device’s stackable interface provides simple scaling to supportbattery cell applications from 3 series to 20 series or more. Protection thresholds and delays arefactory-programmed and available in a variety of configurations. Separate overtemperature andundertemperature thresholds for discharge (OTD and UTD) and charge (OTC and UTC) are provided foradded flexibility.

The device achieves pack protection via the integrated independent CHG and DSG low-sideNMOS FET drivers, which may be disabled through two control pins. These control pins may also beused to achieve cell protection solutions for higher series (6 series and beyond) in a simple andeconomical manner. To do this, simply cascade a higher device CHG and DSG outputs to the immediatelower device control pins. For added flexibility, discharge overcurrent protection delays can beprogrammed using a resistor connected from the OCDP pin to VSS.

The BQ77915 protector achieves a smart passive cell-balancing algorithm via integratedFETs for cell balancing currents up to 50 mA. For higher cell-balancing current requirements,external FETs can be connected. A HIBERNATE mode intended for shipping and storage of the batterypacks enables ultra-low power operation.

The BQ77915 protector is intended for battery packs where no host monitoring isrequired.