No 'CL Cap' LDO Voltage Regulator
The XC6501A121MR-G series is a 6V high speed, low noise CMOS LDO regulator that can provide stable output voltages within a range of 1.2V ~ 5.0V (100mV steps) even without a load capacitor (CL) ! This is possible because phase compensation is carried out internally unlike other LDOs where it is done externally. The series consists of a reference voltage source, driver transistor, error amplifier, current limit circuit, and phase compensation circuit.The CE function enables the circuit to be put into stand-by mode by inputting a low level signal to the CE pin thereby reducing current consumption from an already low 13μA (in operation) to less than 0.1μA. In the stand-by mode, if a CL cap is used, the electric charge stored at CL can be discharged via the internal auto discharge switch and as a result, the VOUT pin quickly returns to the VSS level.The current limit fold-back circuit operates as a short circuit protection and a current limiter function for the output pin.
Available in SOT-25, SC-82, USP-4, USP-3, USPN-4 and WLP-4-01 packages
Features:
- Input Voltage Range: 1.4V~6.0V
- Output Voltage Range: 1.2V~5.0V
- Dropout Voltage: 150mV @ 100mA (VOUT=2.8V)
- Output Current: >200mA (300mA limit)
- Ripple Rejection: 50dB @ 1kHz
- Power Consumption: 13μA
Feature
■
Operating Voltage Range : 1.4～6.0V
Output Voltage Range : 2.0～5.0V（Accuracy:±1%）
1.2～1.95V（Accuracy:±0.02V）
Dropout Voltage : 150mV＠IOUT=100mA, VOUT=2.8V
Low Power Supply : 13μA＠VOUT=2.8V
Stand-by Current : Less than 0.1μA
Ripple Rejection : 50dB＠f=1kHz,VOUT=2.8V
Protection Circuits : Current limit （300mA, TYP.）
: Short circuit protection
Output capacitor is not required : Internal phase compensation
CL High Speed Auto Discharge
Packages USP-3, USP-4
SSOT-24, SOT-25
