The VIPER50ASPTR-E parts manufactured by ST are available for purchase at 9icnet Electronics. Here you can find various types and values of electronic parts from the world's leading manufacturers. The VIPER50ASPTR-E components of 9icnet Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
The production status marked on 9icnet.com is for reference only. If you didn't find what you were looking for, you can get more valuable information by emails, such as the VIPER50ASPTR-E Inventory quantity, preferential price, datasheet, and manufacturer. We are always happy to hear from you, so feel free to contact us.
The VIPER50A-E is IC SWIT PWM SMPS CM PENTAWATT5, that includes VIPER? Series, they are designed to operate with a PWM Low-Standby High Performance Controller Type, Packaging is shown on datasheet note for use in a Tube, that offers Mounting Style features such as Through Hole, it has an Operating Temperature Range range of - 25 C to + 125 C, as well as the Pentawatt-5 HV (Bent and Staggered Leads) Package Case, the device can also be used as Through Hole Mounting Type. In addition, the Supplier Device Package is 5-PENTAWATT, the device is offered in 50W Power Watts, the device has a 1 Output of Number of Outputs, and Output Isolation is Isolated, and the Internal Switch s is Yes, and Voltage Breakdown is 700V, and the Topology is Flyback, and Voltage Start Up is 11V, and the Voltage Supply Vcc Vdd is 8 V ~ 15 V, and Frequency Switching is Up to 200kHz, and the Fault Protection is Current Limiting, Over Temperature, and Control Features is Frequency Control, Soft Start, Sync, it has an Maximum Operating Temperature range of + 125 C, and Operating Supply Current is 12 mA, and the Output Current is 1.5 A, and Switching Frequency is 100 kHz, and the Duty Cycle Max is 50 %, and Input Supply Voltage Min is 12.6 V, and the Input Supply Voltage Max is 13.4 V.
The VIPER50ASP-E is IC SWIT PWM SMPS CM POWERSO10, that includes 8 V ~ 15 V Voltage Supply Vcc Vdd, they are designed to operate with a 11V Voltage Start Up, Voltage Breakdown is shown on datasheet note for use in a 700V, that offers Type features such as Current Mode PWM Controller, Topology is designed to work in Flyback, as well as the 200 kHz Switching Frequency, the device can also be used as 10-PowerSO Supplier Device Package. In addition, the Series is VIPER?, the device is offered in 50W Power Watts, the device has a Tube Alternate Packaging of Packaging, and Package Case is PowerSO-10 Exposed Bottom Pad, and the Output Voltage is 700 V, and Output Isolation is Isolated, and the Output Current is 1.5 A, and Number of Outputs is 1 Output, and the Mounting Style is SMD/SMT, and Mounting Type is Surface Mount, and the Internal Switch s is Yes, and Frequency Switching is Up to 200kHz, and the Fault Protection is Current Limiting, Over Temperature, and Control Features is Frequency Control, Soft Start, Sync.
The VIPER50ASP is IC SWIT PWM SMPS CM POWERSO10, that includes Frequency Control, Soft Start, Sync Control Features, they are designed to operate with a Current Limiting, Over Temperature Fault Protection, Frequency Switching is shown on datasheet note for use in a Up to 200kHz, that offers Internal Switch s features such as Yes, Mounting Type is designed to work in Surface Mount, as well as the Isolated Output Isolation, the device can also be used as PowerSO-10 Exposed Bottom Pad Package Case. In addition, the Packaging is Tube, the device is offered in 50W Power Watts, the device has a VIPER? of Series, and Supplier Device Package is 10-PowerSO, and the Topology is Flyback, and Voltage Breakdown is 700V, and the Voltage Start Up is 11V, and Voltage Supply Vcc Vdd is 8 V ~ 15 V.
