The NCP1351APG parts are AC to DC Switching Converter Flyback Tube 8-Pin PDIP, manufactured by ON are available for purchase at 9icnet Electronics. Here you can find various types and values of electronic parts from the world's leading manufacturers. The NCP1351APG components of 9icnet Electronics are carefully chosen, undergo stringent quality control, and are successfully meet all required standards.
The production status marked on 9icnet.com is for reference only. If you didn't find what you were looking for, you can get more valuable information by emails, such as the NCP1351APG Inventory quantity, preferential price, datasheet, and manufacturer. We are always happy to hear from you, so feel free to contact us.
NCP134AMX120TCG with pin details, that includes LDO Voltage Regulators Product, they are designed to operate with a Very Low Dropout Bias Rail CMOS Voltage Regulator Type, Packaging is shown on datasheet note for use in a Digi-ReelR Alternate Packaging, that offers Mounting Style features such as SMD/SMT, Package Case is designed to work in 4-XDFN Exposed Pad, it has an Operating Temperature range of -40°C ~ 85°C, the device can also be used as Surface Mount Mounting Type. In addition, the Output Type is Fixed, the device is offered in 4-XDFN (1.2x1.2) Supplier Device Package, the device has a 0.8 V ~ 5.5 V of Voltage Input, and Number of Outputs is 1 Output, and the Current Output is 500mA, and Voltage Output is 1.2V, and the Regulator Topology is Positive Fixed, and Voltage Dropout Typical is 0.14V @ 500mA, and the Number of Regulators is 1, and Current Limit Min is 550mA, it has an Maximum Operating Temperature range of + 85 C, it has an Minimum Operating Temperature range of - 40 C, and the Output Voltage is 1.2 V, and Input Voltage MAX is 5.5 V, and the Output Current is 500 mA, and Input Voltage MIN is 800 mV, and the Load Regulation is 1.5 mV, and Voltage Regulation Accuracy is 0.5 %, and the Ib Input Bias Current is 80 uA, and Dropout Voltage is 140 mV, and the Line Regulation is 0.01 %/V, and PSRR Ripple Rejection Typ is 70 dB.
The NCP1351ADR2G is IC CTRLR PWM VAR-OFF TIME 8-SOIC, that includes 8.9 V ~ 28 V Voltage Supply Vcc Vdd, they are designed to operate with a 18V Voltage Start Up, Unit Weight is shown on datasheet note for use in a 0.005044 oz, that offers Topology features such as Flyback, Supplier Device Package is designed to work in 8-SOIC, as well as the NCP1351 Series, the device can also be used as 90 ns Rise Time. In addition, the Packaging is Digi-ReelR, the device is offered in 8-SOIC (0.154", 3.90mm Width) Package Case, the device has a - 0.3 V to + 20 V of Output Voltage, and Output Isolation is Isolated, and the Output Current is 400 mA, it has an Operating Temperature range of -25°C ~ 125°C (TJ), and the Operating Supply Voltage is - 0.3 V to + 28 V, and Number of Outputs is 1 Output, and the Mounting Style is SMD/SMT, and Mounting Type is Surface Mount, it has an Maximum Operating Temperature range of + 150 C, and Internal Switch s is No, and the Fault Protection is Current Limiting, Over Load, Over Power, Short Circuit, and Fall Time is 100 ns.
The NCP1351ADAPGEVB is EVAL BOARD FOR NCP1351ADAPG, that includes Fully Populated Board Type, they are designed to operate with a 3A Current Output, Frequency Switching is shown on datasheet note for use in a 65kHz, that offers Input Voltage features such as 90 to 265 VAC, Main Purpose is designed to work in AC/DC, Primary Side, as well as the 3 A Output Current, the device can also be used as 1, Isolated Outputs and Type. In addition, the Output Voltage is 19 V, the device is offered in 57W Power Output, the device has a Evaluation Boards of Product, and Regulator Topology is Flyback, and the Supplied Contents is Board, and Tool Is For Evaluation Of is NCP1351, and the Type is Current Mode PWM Controllers, and Utilized IC Part is NCP1351, and the Voltage Input is 90 ~ 265 VAC, and Voltage Output is 19V.
