The LTM8061IV-4.1#PBF is a high efficiency 32V, 2A μModule® (power module) standalone Li-Ion battery charger. It is optimized for one and two-cell packs, with fixed float voltage options: 4.1V, 4.2V, 8.2V and 8.4V. The LTM8061IV-4.1#PBF provides a constant-current/constant-voltage charge characteristic, with maximum charge current up to 2A. A precondition feature trickle charges a depleted battery, and bad battery detection provides a signal and suspends charging if a battery does not respond to preconditioning.
The LTM8061IV-4.1#PBF can be configured to terminate charging when charge current falls to one-tenth the programmed maximum current or to use an internal timer if a timebased termination scheme is desired. Once charging is terminated, the LTM8061IV-4.1#PBF enters a low current standby mode. An auto-restart feature starts a new charge cycle if the battery voltage drops 2.5% from the float voltage, or if a new battery is inserted into a charging system.
The LTM8061IV-4.1#PBF is packaged in a thermally enhanced, compact (9mm × 15mm × 4.32mm) over-molded land grid array (LGA) package suitable for automated assembly by standard surface mount equipment. The LTM8061IV-4.1#PBF is RoHS compliant.
Feature
- Wide Input Voltage Range: 4.95V to 32V (40V Absolute Maximum)
- Float Voltage Options:
- 1-Cell: 4.1V, 4.2V
- 2-Cell: 8.2V, 8.4V
- Programmable Charge Current: Up to 2A
- User-Selectable Charge Termination: C/10 or Onboard Termination Timer
- Dynamic Charge Rate Programming/Soft-Start Pin
- Programmable Input Current Limit
- Optional Reverse Input Protection
- NTC Resistor Temperature Monitor
- 0.5% Float Voltage Accuracy
- Bad-Battery Detection with Auto-Reset
- Tiny, Low Profile (9mm × 15mm × 4.32mm) Surface Mount LGA Package
Applications
- Industrial Handheld Instruments
- 12V to 24V Automotive and Heavy Equipment
- Professional Video/Camera Chargers
(Picture: Pinout)
