The PAC1934T-I/J6CX is a four channel power/energy monitor with current sensor amplifier and bus voltage monitors that feed high resolution ADCs. Digital circuitry performs power calculations and energy accumulation. The PAC1934T-I/J6CX enables energy monitoring with integration periods from 1 ms to up to 36 hours. Bus voltage, sense resistor voltage, and accumulated proportional power are stored in registers for retrieval by the system master or embedded controller.
The sampling rate and energy integration period can be controlled over SMBus or I2C. Active channel selection, one-shot measurements, and other controls are also configurable. The PAC1934T-I/J6CX uses real time calibration to minimize offset and gain errors. No input filters are required for this device.
For product comparison, please consider:PAC1934
Feature
- High-Side Current Sensor (4 Channels)
- 100 mV full scale voltage sense range, 16-bit resolution
- Bidirectional or unidirectional options
- Wide Bus Voltage Measurement Range 0V to 32V, 16-Bit Resolution
- 1% Power Measurement Accuracy Over a Wide Dynamic Range
- On-Chip Accumulation of 28-Bit Power Results for Energy Measurement
- 48-bit power accumulator register for recording data
- 24-bit accumulator count
- User programmable sampling rates of 8, 64, 256, 1024 samples per second
- 36 hours of power data accumulation at 8 samples per second
- 2.7V to 5.5V Supply Operation
- Separate I/O Pin for Digital I/O 1.62-5.5V
- I2C® Fast Mode Plus (1Mp/S) and SMBus 3.0
- WLCSP package (2.225 x 2.17)
Applications
- WIN10 laptop, tablet, workstation, cell phone
- Networking
- Automotive
- Linux® Systems
- Linux, Microsoft®, and Cloud Servers
- Industrial
