The MAX4210/MAX4211CETE low-cost, low-power, high-side power/current monitors provide an analog output voltage proportional to the power consumed by a load by multiplying load current and source voltage. The MAX4210/MAX4211CETE measure load current by using a high-side current-sense amplifier, making them especially useful in battery-powered systems by not interfering with the ground path of the load. The MAX4210 is a small, simple 6-pin power monitor intended for limited board space applications. The MAX4210A/B/C integrate an internal 25:1 resistor-divider network to reduce component count. The MAX4210D/E/F use an external resistor-divider network for greater design flexibility. The MAX4211CETE is a full-featured current and power monitor. The device combines a high-side current-sense amplifier, 1.21V bandgap reference, and two comparators with open-drain outputs to make detector circuits for overpower, overcurrent, and/or overvoltage conditions. The open-drain outputs can be connected to potentials as high as 28V, suitable for driving high-side switches for circuit-breaker applications. Both the MAX4210/MAX4211CETE feature three different current- sense amplifier gain options: 16.67V/V, 25.00V/V, and 40.96V/V. The MAX4210 is available in 3mm x 3mm, 6-pin TDFN and 8-pin μMAX packages and the MAX4211CETE is available in 4mm x 4mm, 16-pin thin QFN and 16-pin TSSOP packages. Both parts are specified for the -40°C to +85°C extended operating temperature range.
Feature
- Real-Time Current and Power Monitoring
- ±1.5% (max) Current-Sense Accuracy
- ±1.5% (max) Power-Sense Accuracy
- Two Uncommitted Comparators (MAX4211)
- 1.21V Reference Output (MAX4211)
- Three Current/Power Gain Options
- 100mV/150mV Current-Sense Full-Scale Voltage
- +4V to +28V Input Source Voltage Range
- +2.7V to +5.5V Power-Supply Voltage Range
- Low Supply Current: 380μA (MAX4210)
- 220kHz Bandwidth
- Small 6-Pin TDFN and 8-Pin μMAX Packages (MAX4210)
Applications
- Baseband Analog Multipliers
- Measurement Instrumentation
- Overpower Circuit Breakers
- Power-Level Detectors
- Power-Supply Displays
- Short-Circuit Protection
- Smart Battery Packs/Chargers
- Smart Peripheral Control
- VGA Circuits
