The MMPF0100F3AEPR2 is the first of the PF series of PMICs, featuring:
- Configurable and programmable architecture supporting outputs with various current ratings to power the core processor, memory and a wide range of peripherals
- Integration of full system-level power management functions to simplify system design
- Optimized performance architecture for efficient, advanced functionality for consumer, industrial and automotive applications
The MMPF0100F3AEPR2 is suited to all i.MX 6 processors: i.MX 6SoloX, i.MX 6SoloLite, i.MX 6Solo, i.MX 6DualLite, i.MX 6Dual, i.MX 6Quad, i.MX 6DualPlus and i.MX 6QuadPlus. It is built into multiple reference designs in the i.MX 6 family to provide a platform-level solution from that enables faster time to market.
Feature
- Input voltage range to PMIC:2.8 – 4.5 V
- Four to six buck regulators depending on configuration
- Single/dual phase/parallel options
- DDR termination tracking mode option
- DVS option
- 5 V boost regulator for USB OTG
- Six general purpose linear regulators
- Coin cell charger and RTC supply
- DDR termination reference voltage
- Power control logic with processor interface and event detection
- Programmable output voltage, sequence and timing
- I2C control
- Individually programmable On, Off and Standby modes
- OTP (one time programmable) memory for device configuration
- Reconfigurable OTP capability prior to blowing the configuration register fuses
- End customer programmable
- Available in two package options
- E-Type QFN – 8 mm x 8 mm, 56 Ld
- Wettable Flank QFN – 8 mm x 8 mm, 56 Ld
- Available in consumer/industrial and automotive AEC-100 Grade 3 qualifications
- Industry-leading light load efficiency
- Software support for i.MX6 dynamic voltage scaling
