The HCPL-530K is a Class K hermetically sealed optocoupler in an 8-Pin ceramic DIP package and the highest level of reliability. Gold plated leads, solder dipped leads and various lead form options are also available. See the datasheet for details.
The HCPL-530K is manufactured and tested on a MIL-PRF-38534 certified line and included in the DLAQualified Manufacturers List QML-38534 for Hybrid Microcircuits. The product is capable of operation and storage over the full military temperature range and may also be purchased as either commercial grade, with full MIL-PRF-38534 Class Level H testing, or from the DLAStandard Microcircuit Drawing (SMD) 5962-96852.
The device consists of a GaAsP LED optically coupled to an integrated high gain photodetector. Minimized propagation delay difference between devices make these optocouplers excellent solutions for improving inverter efficiency through reduced switching dead time. An on chip 20 kohm output pull-up resistor can be enabled by shorting pins 6 and 7, thus eliminating the need for an external pull-up resistor in common IPM applications. Specifications and performance plots are contained in the datasheet for typical IPM applications.
Feature
- Highest Reliability, 8-Pin DIP
- Performance Guaranteed from -55 degCto 125 degC
- MIL-PRF-38534 Class K, QML-38534
- Dual Marked with Device Part Number and DLAStandard Microcircuit Drawing
- High Common Mode Rejection (CMR): 10 kV/µsat VCM = 1000 V
- Fast Maximum Propagation Delays (tPHL = 450 ns, tPLH = 650 ns)
- Minimized Pulse Width Distortion (PWD = 450 ns)
- CTR > 30% at If = 10 mA
- 1500 Vdc Withstand Test Voltage
Applications
- Military, Aerospace,and Industrial
- High Reliability Systems
- Transportation, Medical, and Life Critical Systems
- IPM Isolation
- Isolated IGBT/MOSFET Gate Drive
- AC and Brushless DC Motor Drives
- Harsh Industrial Environments
