These high-gain series optocouplers use a Light Emitting Diode and an integrated high gain photodetector to provide extremely high current transfer ratio between input and output. Separate pins for the photodiode and output stage result in LVTTL compatible saturation voltages and high speed operation.Where desired, the VCC and VO terminals may be tied together to achieve photodarlington operation. A base access terminal allows a gain bandwidth adjustment to be made. These optocouplers are for use in LVTTL/LVCMOS or other low power applications. A 400 percent minimum current transfer ratio is guaranteed over 0oC to 70oC operating range for only 0.5 mA of LED current. The HCPL-073L-060E is a surface mount device packaged in an industry standard SOIC-8 footprint. The SOIC-8 does not require "through holes" in a PCB. This package occupies approximately one-third the footprint area of the standard dual-in-line package. The lead profile is designed to be compatible with standard surface mount processes.
Feature
- 3.3V/5V Dual Supply Voltages
- Low power consumption
- High current transfer ratio
- Low input current requirements - 0.5 mA
- LVTTL/LVCMOS compatible output
- Performance guaranteed over temperature 0oC to 70oC
- Base access allows gain bandwidth adjustment
- High output current - 60 mA
- Safety approval, UL, IEC/EN/DIN EN 60747-5-2, CSA
- Options available are:
Applications
- Ground isolate most logic families - LVTTL/LVCMOS
- Low input currrent line receiver
- High voltage insulation
- EIA RS-232C line receiver
- Telephone ring detector
- 117 V AC line voltage status indicator - low input power dissipation
- Low power systems - ground isolation
