The ASSR-41XX Solid State Relay (SSR) series uses an AlGaAs infrared light-emitting diode (LED) input stage optically coupled to a high-voltage output detector circuit. The detector consists of a high-speed photovoltaic diode array and driver circuitry to switch on/off two discrete high voltage MOSFETs. The relay turns on (contact closes) with a minimum input current of 3mA through the input LED. The relay turns off (contact opens) with an input voltage of 0.8V or less. The single channel configurations, ASSR-4118 and ASSR-4119, are equivalent to 1 Form A Electromechanical Relays (EMR), and the dual channel configuration, ASSR-4128, is equivalent to 2 Form A EMR. They are available in 4-pin SO, 6-pin DIP, 8-pin DIP and Gull Wing Surface Mount for DIP packages. ASSR-4119 enables AC/DC and DC-only output connections. For DC-only connection, the output current, Io, increases to 0.2A and the on-resistance, R(ON) reduces to 10Ω.
Feature
- Compact Solid-State Bi-directional Signal Switch
- Single and Dual Channel Normally-off Single-Pole-Single-Throw (SPST) Relay
- 400V Output Withstand Voltage
- 0.1A or 0.2A Current Rating (see schematic for ASSR-4119 connection A and B)
- Low Input Current: CMOS Compatibility
- Low On-Resistance: 8 Ω Typical for DC only, 25 Ω Typical for AC/DC
- High Input-to-Output Insulation Voltage(Safety and Regulatory Approvals Pending)- 3750 Vrms for 1 min per UL1577- CSA Component Acceptance
- Options available are:ASSR-4118 50XE = Tape and Reel Packaging OptionXXXE = RoHS Compliant Option
ASSR-4119 & ASSR-412830XE = Gull Wing Option50XE = Tape and Reel Packaging OptionXXXE = RoHS Compliant Option
Applications
- Telecommunication Switching
- Data Communications
- Industrial Controls
- Medical
- Security
- EMR / Reed Relay Replacement
