The LTM4604AEV#TRPBF/AIV is a complete 4A switch mode step-down μModule® (power module) regulator with ±1.75% maximum total output voltage error. Included in the package are the switching controller, power FETs, inductor and all support components. Operating over an input voltage range of 2.375V to 5.5V, the LTM4604AEV#TRPBF/AIV supports an output voltage range of 0.8V to 5V, set by a single resistor. This high efficiency design delivers up to 4A continuous current (5A peak). Only input and output capacitors are needed to complete the design.
The 0.630mm LGA pads with 1.27mm pitch simplify PCB layout by providing standard trace routing and via placement. (The LTM4604AEV#TRPBF/AIV has smaller pads than the LTM4604). The low profile package enables utilization of unused space on the bottom of PC boards for high density point of load regulation. High switching frequency and a current mode architecture enable a very fast transient response to line and load changes without sacrificing stability.
Fault protection features include foldback current protection, thermal shutdown and a programmable soft-start function. The LTM4604AEV#TRPBF/AIV is offered with SnPb (BGA) or RoHS-compliant terminal finish.
NotesLTM4604-LTM4604ASmaller pad sizes provide more distance between adjacent pads therefore there is less chance of solder paste or solder spreading outside the pad areaFeature
- Complete Standalone Power Supply
- ±1.75% Max Total DC Output Error (–40°C to 125°C)
- Wide Input Voltage Range: 2.375V to 5.5V
- 4A DC, 5A Peak Output Current
- 0.8V to 5V Output
- Output Voltage Tracking
- UltraFastTM Transient Response
- Power Good Indicator
- Current Mode Control
- Current Foldback Protection, Parallel/Current Sharing
- Up to 95% Efficiency
- Programmable Soft-Start
- Micropower Shutdown: IQ ≤ 7μA
- Overtemperature Protection
- 9mm × 15mm × 2.32mm LGA and 9mm × 15mm × 3.42mm BGA Packages
Applications
- Telecom and Networking Equipment
- Servers
- Storage Cards
- ATCA Cards
- Industrial Equipment
(Picture: Pinout)
