The DS2422S temperature/datalogger combines the core functions of a fully featured datalogger in a single chip. It includes a temperature sensor, realtime clock (RTC), memory, 1-Wire® interface, and serial interface for an analog-to-digital converter (ADC) as well as control circuitry for a charge pump.
APPLICATIONS
Temperature Logging in Cold Chain, Food Safety, and Bio Science
High-Temperature Logging (Process Monitoring, industrial Temperature Monitoring)
General-Voltage Datalogging (Pressure, Humidity, Light, Material Stress)
Feature
■ Automatically Wakes Up, Measures Temperature and/or Reads an External ADC and Stores Values in 8kB of Datalog Memory in 8 or 16-Bit Format
■ On-Chip Direct-to-Digital Temperature Converter with 8-Bit (0.5°C) or 11-Bit (0.0625°C) Resolution
■ Sampling Rate from 1s up to 273hrs
■ Programmable Recording Start Delay After Elapsed Time or Upon a Temperature Alarm Trip Point
■ Programmable High and Low Trip Points for Temperature and Data Alarms
■ Quick Access to Alarmed Devices Through 1-Wire Conditional Search Function
■ 512 Bytes of General-Purpose Memory Plus 64 Bytes of Calibration Memory
■ Two-Level Password Protection of all Memory and Configuration Registers
■ Unique Factory-Lasered 64-Bit Registration Number Assures Error-Free Device Selection and Absolute Part Identity
■ Built-in Multidrop Controller Ensures Compatibility with Other Dallas Semiconductor 1-Wire Net Products
■ Directly Connects to a Single Port Pin of a Microprocessor and Communicates at Up to 15.4kbps at Standard Speed or up to 125kbps in Overdrive Mode
■ -40°C to +85°C Operating Range
■ 2.8V to 3.6V Single-Supply Battery Operation
■ Low Power (1.2µA Standby, 350µA Active)
