The ICM-20602 is a 6-axis MotionTracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3mm x3mm x0.75mm (16-pin LGA) package.• High performance specso Gyroscope sensitivity error: ±1%o Gyroscope noise: ±4 mdps/√Hzo Accelerometer noise: 100μg/√Hz• Includes 1 KBFIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode • EIS FSYNC supportICM-20602 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I²C and high speed SPI at 10MHz.Applications• Smartphones and Tablets• Wearable Sensors• IoT Applications• Motion-based game controllers• 3D remote controls for Internet connected DTVs and set top boxes, 3D mice 9icnet Electronics is an authorized InvenSense distributor.
Feature
- 3 Axis Gyroscope with Programmable FSR of ±250 dps, ±500 dps, ±1000 dps, and ±2000 dps
- 3 Axis Accelerometer with Programmable FSR of ±2g, ±4g, ±8g, and ±16g
- User-programmable interrupts
- Wake-on-motion interrupt for low power operation of applications processor
- 1KB FIFO buffer enables the applications processor to read the data in bursts
- On-Chip 16bit ADCs and Programmable Filters
- Host interface: 10MHz SPI or 400kHz Fast Mode I2C
- Digital-output temperature sensor
- VDD operating range of 1.71V to 3.45V
- MEMS structure hermetically sealed and bonded at wafer level
Applications
IoT (Internet of Things), Portable Devices, Smartphones
