ICG-20660L

The ICG-20660L is a 6-axis Motion Tracking device that combines a 3-axis gyroscope, 3-axis accelerometer, in a small 3x3x0.75 mm (16-pin LGA) package.• High performance specso ICG-20660L: Gyroscope sensitivity error: ±1%o Gyroscope noise: 6.5mdps/√Hz• Includes 512-byte FIFO to reduce traffic on the serial bus interface, and reduce power consumption by allowing the system processor to burst read sensor data and then go into a low-power mode• EIS FSYNC supportThe only difference between the 2 devices is the gyro initial sensitivity where it’s 1% on ICG-20660 and it’s 3% on ICG-20660. The ICG-20660 includes on-chip 16-bit ADCs, programmable digital filters, an embedded temperature sensor, and programmable interrupts. The device features an operating voltage range down to 1.71V. Communication ports include I²C and high speed SPI at 7MHz.Applications:• OIS (Optical Image Stabilization) in phone camera modules, DSLR, and DSC• EIS (Electronic Image Stabilization) in DSC, and phone camera modules 9icnet Electronics is an authorized InvenSense distributor.