By using a technique that samples the state of the CONVST (convert start) signal at the end of a conversion, the AD7810YRMZ-REEL7 may be used in an automatic power-down mode. When used in this mode, the AD7810YRMZ-REEL7 automatically powers down at the end of a conversion and "wakes up" at the start of a new conversion. This feature significantly reduces the power consumption of the part at lower throughput rates. The AD7810YRMZ-REEL7 can also operate in a high speed mode where the part is not powered down between conversions. In this high speed mode of operation, the conversion time of the AD7810YRMZ-REEL7 is 2 µs. The maximum throughput rate is dependent on the speed of the serial interface of the microcontroller.
The part is available in a small 8-pin, 0.3" wide, plastic dual-in-line package (mini-DIP); in an 8-lead, small outline IC (SOIC); and in an 8-lead microSOIC package.
Feature
- 10-Bit ADC with 2.3 µs Conversion Time
- Small Footprint 8-Lead microSOIC Package
- Specified Over a –40°C to +105°C Temperature Range
- Inherent Track-and-Hold Functionality
- Operating Supply Range: 2.7 V to 5.5 V
- Specifications at 2.7 V to 5.5 V
- Microcontroller-Compatible Serial Interface
- Optional Automatic Power-Down at End of Conversion
- Low Power Operation:270 µW at 10 kSPS Throughput Rate2.7 mW at 100 kSPS Throughput Rate
- Analog Input Range: 0 V to VREF
- Reference Input Range: 0 V to VDD
