The JN5169-001-M03-2Z is an ultra low power, high performance wireless microcontroller suitable forZigBee applications. It features 512 kB embedded Flash, 32 kB RAM and 4 kB EEPROMmemory, allowing OTA upgrade capability without external memory. The 32-bit RISCprocessor offers high coding efficiency through variable width instructions, amulti-stage instruction pipeline and low-power operation with programmable clock speeds.It also includes a 2.4 GHz IEEE802.15.4 compliant transceiver and a comprehensive mix ofanalog and digital peripherals. The very low RX operating current (down to 13 mAand with a 0.7 μA sleep timer mode) gives excellent battery life allowing operationdirect from a coin cell.
The peripherals support a wide range of applications. They include a 2-wire compatibleI²C-bus and SPI-bus which can operate as either master or slave, a6-channel ADC with a battery monitor and a temperature sensor. It can support a largeswitch matrix of up to 100 elements, or alternatively a 40-key capacitive touch pad.
For support documentation, please click here.
Feature
- Single chip device to run stack and application
- Very low current solution for long battery life; over 10 years
- Very low RX current for low standby power of mains powered nodes
- Integrated power amplifier for long range and robust communication
- High tolerance to interference from other 2.4 GHz radio sources
- Supports multiple network stacks
- Highly featured 32-bit RISC CPU for high performance and low power
- Large embedded Flash memory to enable over-the-air firmware updates withoutexternal Flash memory
- System BOM is low in component count and cost
- Flexible sensor interfacing options
- Very thin quad flat 6 × 6 mm, 40 terminal package; lead-free and RoHScompliant
- Temperature range: -40 °C to +125 °C
- 2.4 GHz IEEE802.15.4 compliant
- RX current 14.7 mA, in low power receive mode 13 mA
- Receiver sensitivity -96 dBm
- Configurable transmit power, for example:
- 10 dBm, 23.3 mA
- 8.5 dBm, 19.6 mA
- 3 dBm, 14 mA
- Radio link budget 106 dB
- Maximum input level of +10 dBm
- Compensation for temperature drift of crystal oscillator frequency
- 128-bit AES security processor
- MAC accelerator with packet formatting, CRCs, address check, auto-acks,timers
- Integrated ultra low-power RC sleep oscillator (0.7 μA)
- 2.0 V to 3.6 V battery operation
- Deep sleep current 50 nA (wake-up from IO)
- < 0.15 $ external component cost
- Antenna diversity (Auto RX)
- 32-bit RISC CPU; 1 MHz to 32 MHz clock speed
- Variable instruction width for high coding efficiency
- Multi-stage instruction pipeline
- 512 kB Flash
- 32 kB RAM
- 4 kB EEPROM
- Data EEPROM with guaranteed 100 k write operations
- ZigBee PRO stack with Home Automation, Light Link and Smart Energyprofiles
- 2-wire I²C-bus compatible serial interface; can operate as eithermaster or slave
- 5 × PWM (4 timers, 1 timer/counter)
- 2 low-power sleep counters
- 2 UARTs
- SPI-bus master and slave port, 3 selects
- Supply voltage monitor with 8 programmable thresholds
- 6-input 10-bit ADC, comparator
- Battery and temperature sensors
- Watchdog and Supply Voltage Monitor (SVM)
- Up to 20 Digital IO (DIO) pins
- Robust and secure low-power wireless applications
- ZigBee Smart Energy networks
- ZigBee Light Link networks
- ZigBee Home Automation networks
- Toys and gaming peripherals
- Energy harvesting - for example, self-powered light switch
