The PI90LV01TEX and PI90LVB01 are differential line drivers that use low-voltage differential signaling (LVDS) to support data rates up to 660 Mbps. These products are designed for applications requiring high-speed, low-power consumption, low-noise generation, and a small package. The TIA/EIA-644 standard compliant electrical interface provides a minimum differential output voltage magnitude of 247mV into a 100- ohm load and receipt of 100mV signals with up to 1V of ground potential difference between a transmitter and receiver. The PI90LVB01 doubles the output drive current to achieve LVDS levels with a 50-ohm load. A low-voltage TTL/CMOS input level is translated by the device into a low-voltage (350mV) differential output signal.
Feature
- Meets or Exceeds ANSI TIA/EIA-644-1955 Standard
- Signaling rates up to 660Mbps
- Bus-Terminal ESD exceeds 2kV
- Low-Voltage Differential Signaling with typical Output Voltages of 350mV:
- 100-ohm load (PI90LV01)
- 50-ohm load (PI90LVB01)
- Typical Propagation Delay Times of 1.5ns
- Typical Power Dissipation of 20mW @200MHz
- Low-VoltageTTL(LVTTL) Level is 5V Tolerant
- Operates from a 3.3V supply
- Extended Industrial Temperature Operating Range: –40°C to 105°C
- Packaging (Pb-free & Green available):
- 5-pin space-saving SOT23 (T)
Applications
include point-to-point (single termination) and multi- point (double termination) baseband data transmissions over controlled impedance media . The transmission media can be printed circuit board traces, backplanes, or cables.
The PI90LV01 and companion line receivers (PI90LV02 and PI90LVT02) provide new alternatives to RS-232, PECL and ECL devices for high-speed, point-to-point interface applications.
