The AD7284WBSWZ-RL contains all the functions required for the general-purpose monitoring of stacked Li-Ion batteries, as used in hybrid electric vehicles and battery backup applications.
The AD7284WBSWZ-RL has multiplexed cell voltage and auxiliary, analog-to-digital converter (ADC) measurement channels supporting four to eight cells of battery management. The device provides amaximum total unadjusted error, TUE, (cell voltage accuracy) of ±3 mV that includes all the internal errors from input to output. The primary ADC resolution is 14 bits.
The AD7284WBSWZ-RL also includes an integrated secondary measurement path that validates the data on the primary ADC. Other diagnostic features include the detection of open inputs, communication, and power supply related faults.
The AD7284WBSWZ-RL cell balancing interface outputs control the external field effect transistors (FETs) to allow discharging of individual cells.
There are two on-chip 2.5 V voltage references: one reference for the primary measurement path, and one for the secondary measurement path.
The AD7284WBSWZ-RL operates from one VDD supply, ranging from 10 V to 40 V. The device provides eight differential analog input channels to accommodate large common-mode signals across the full VDD range. Each channel allows an input signal range, VPINx − VPIN(x − 1) and VSINx – VSIN(x − 1), of 0 V to 5 V, where x = 0 to 8. The input pins assume a series stack of eight cells. The AD7284WBSWZ-RL includes four auxiliary ADC input channels that can be used for temperature measurement or system diagnostics.
The AD7284WBSWZ-RL has a differential daisy-chain interface that allows multiple devices to be stacked without the need for individual device isolation. By design, this interface allows both device to device communication within the same module and communication between devices on different modules.
Feature
- 8 analog input channels, integrated secondary monitor
- ±3 mV maximum cell voltage accuracy, TUE, 14-bit ADC
- Very low measurement latency across 96 cells
- Stack voltage measurement
- ±16 mV typical battery stack voltage (TUE) accuracy
- Cell balancing interface, with individually programmable on time
- 4 auxiliary analog input channels, 14-bit ADC
- Suitable for thermistor inputs and external diagnostics
- Buffered reference output for ratiometric measurements
- Internal temperature sensor
- VDD operating range: 10 V to 40 V
- On-chip 5 V regulator
- Watchdog timer
- IDD matching current: 100 μA
- Robust, proprietary daisy-chain interface
- SPI to host controller
- CRC protection on read and write commands
- 2 general-purpose outputs
- 64-lead low profile quad flat package, exposed pad (LQFP_EP)
- Junction temperature range: −30°C to +120°C
- Qualified for automotive applications
Applications
- Li-Ion battery monitoring
- Electric and hybrid electric vehicles
- Stationary power applications
(Picture: Pinout)
