MPM3686GRU

MPS MPM368x Step-Down DC/DC Power Modules are easy-to-use and fully integrated in 6A or 10A. They integrate a DC/DC converter, power inductor, input/output capacitors and the necessary resistors/capacitors in a compact QFN 12x12x4mm package. This total power solution needs as few as two external components (one resistor and one capacitor) to work. MPS MPM368x can deliver 6A or 10A output currents over a wide input supply voltage range with excellent load and line regulation. The MPM3682 use Constant-On-Time (COT) control to provide fast transient response and ease the loop stabilization. The default under voltage lockout threshold is internally set around 4.1V, but a resistor network on the enable pin can increase this threshold. MPS MPM368x have an internal LDO to power the control circuits and the integrated power devices. This LDO can be disabled by an external 5V to boost the efficiency. The MPM3682 have an internal 3ms soft start (SS) timer. They can be increased with an extra SS capacitor. An open drain power good signal indicates that the output voltage is within nominal voltage range. The MPM3682 have fully integrated protection features that include over-current protection, over-voltage protection and thermal shutdown.