·SPI-compatible serial bus interface
·Single and double transfer rate(STR/DTR)
·Clock frequency
-133MHz(MAX)for all protocols in STR-90 MHz(MAX)for all protocols in DTR
·Dual/quad 1/O commands for increased through-put up to 90 MB/s
·Supported protocols in both STR and DTR
-Extended I/O protocol
-Dual I/O protocol-Quad I/O protocol
·Execute-in-place(XIP)
·PROGRAM/ERASE SUSPEND operations
·Volatile and nonvolatile configuration settings
·Software reset
·Additional reset pin for selected part numbers·Dedicated 64-byte OTP area outside main memory
-Readable and user-lockable
-Permanent lock with PROGRAM OTP command
·Erase capability
-Bulk erase
-Sector erase 64KB uniform granularity
-Subsector erase 4KB,32KB granularity
·Security and write protection
-Volatile and nonvolatile locking and software write protection for each 64KB sector
-Nonvolatile configuration locking
-Password protection
-Hardware write protection:nonvolatile bits (BP[3:0] and TB)define protected area size
-Program/erase protection during power-up
-CRC detects accidental changes to raw data
·Electronic signature
-JEDEC-standard 3-byte signature(BA18h)
-Extended device ID:two additional bytes identify device factory options
·JESD47H-compliant
-Minimum 100,000 ERASE cycles per sector
-Data retention:20 years(TYP)
(Picture: Pinout)
