The MP110-10 is a flyback regulator with an integrated 900V MOSFET. Requiring a minimum number of external components, the MP110-10 provides excellent power regulation in AC-DC applications that require high reliability. These applications include smart meters, large appliances, industrial controls and products powered by unstable AC grids.The regulator uses peak current mode control to provide excellent transient response and easy loop compensation. When the output power falls below a given level, the regulator enters burst mode to lower the stand-by power consumption. The MPS proprietary 900V monolithic process enables an over temperature protection (OTP) that is on the same silicon of the 900V power FET, offering the most precise thermal protection. It also offers a full suite of protection features such as VCC under-voltage lockout, over-load protection, over-voltage protection, and short-circuit protectionThe MP110-10 is designed to minimize electromagnetic interference for wireless communication in home and building automation applications. The operating frequency is externally programmed with a single resistor so that the power supply’s radiated energy can be designed to avoid the interference to wireless communication.In addition to the programmable frequency, the MP110-10 employs a frequency jittering function that not only greatly reduces the noise level, but also reduces the cost of EMI filter.The MP110-10 is available in the PDIP8-7EP package
Feature
- Internal Integrated 900V MOSFET
- Programmable switching frequency up to 300kHz
- Frequency jittering
- Current-mode operation
- Internal high voltage current source
- Low standby power consumption via active burst mode
- Internal leading-edge blanking
- Built-in soft-start function
- Internal slope compensation
- Built-in PRO pin pull-up auto restart function
- Over-Temperature Protection (OTP)
- VCC under-voltage lockout with hysteresis
- Over-Voltage Protection on VCC
- Time-based overload protection
- Short-Circuit Protection (SCP)
